Home > Test Equipment >

ASTM D2843 Smoke Density Tester For Building Materials

Product Categories

Lab Testing Equipment [332]
Flammability Testing Equipment [92]
Fire Testing Equipment [65]
Test Equipment [31]
Mattress Testing Machine [35]
Environmental Test Chamber [80]
Toys Testing Equipment [102]
Oil Analysis Testing Equipment [101]
Footwear Testing Equipment [92]
Furniture Testing Equipment [109]
Tensile Strength Testing Machine [36]
Textile Testing Equipment [88]
Leather Testing Equipment [23]
Temperature And Humidity Test Chamber [15]
Electronic Testing Equipment [33]
Building Materials Flammability Tester [59]
Cosmetics Testing Equipment [6]

SKYLINE INSTRUMENTS CO.,LTD

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

ASTM D2843 Smoke Density Tester For Building Materials

Ask Lasest Price
Brand Name :	SKYLINE
Model Number :	SL-FL083
Certification :	CE
Price :	negotiated
Payment Terms :	T/T, L/C, Western Union
Supply Ability :	1 unit/ month
Delivery Time :	10 work days

Add to Cart

Product Details
Company Profile

ASTM D2843 Smoke Density Tester For Building Materials

DIN 4102 Building Material Flammability Testing Equipment / Smoke Density Fire Tester

Application

Suitable used for measuring the somke-producing characteristic of building material under controlled condition of combustion or decomposition, and also can be used for other plastics.

Standards

ASTM D 2843,DIN 4102

Specification

1. Maximum smoke density (MSD) and smoke density (SDR) for the specimen: 0-100% continuously measurable and automatically calculated;
2. With the standard optical correction error of not more than 3%; each device is equipped with three standard filters, proof of light source data, representative
3. Bunsen lamp working pressure (210 ± 5) KPa;
4. Bunsen lamp on the sample to impose a flame 4min;
5. Automatic timing, automatic ignition, automatic smoke; luminous flux can be phased linear calibration test data
more acurrate;
6. Touch Screen:
a. Size: 5 inch effective display size 11cm wide 6.28cm;
b. Resolution: 800 * 480
c. communication interface RS232, 3.3V CMOS or TTL, serial port
d. storage capacity: 1G
e. Using pure hardware FPGA driver display, "zero" start time, power can run
f. using M3 + FPGA architecture, M3 is responsible for instruction resolution, FPGA focus TFT display, speed and reliability are leading the same kind of program
g. The main controller uses low-power processor, automatically enter the energy-saving mode
7. Gas source: 95% propane gas, or the same purity of the gas (customer-owned);
8. long * wide * high 740 * 500 * high 900 (mm)

Burning lamp	for the students light, length 260mm, nozzle diameter 0.13mm, 45 ° angle with the smoke box;
Photoelectric system	light source for the lamp, power 15W, operating voltage 6V;
Exhaust system	the machine is equipped with a strong fan, after the test, the exhaust can be discharged outdoors;
Smoke density measurement range	0 ~ 100%;
Smoke density measurement accuracy	± 3%;
Receiver	for the silicon photovoltaic cells, light transmission rate of 0% for the passage of light, light transmission rate of 100% light without cover completely through;
Main burner working pressure	276KPa (adjustable);

What is smoke density test?

This test measures the amount of smoke given off by a material that is burning or smoldering. The material is tested when it begins to smolder and again when a flame source is added. The smoke density is between 0 (no smoke generated) and 800.

Product Tags:


*From:	Your email address is incorrect!
*To:	SKYLINE INSTRUMENTS CO.,LTD
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!