Building Materials Flammability Tester Radiant Flooring Panel
Apparatus
Application
To measure the critical radiant flux of flame stop spreading
horizontally, and smoke density of flooring material during test.
Features
1. Blower for gas supply of radiant plate can supply gas
continuously, while air compressor supply gas uncontinuously.
2. Heat Flux meter, portable water cooling system without running
water supply.
3. Ventilation hood of stainless steel on the top of the chamber.
4. Inner chamber of Heat and corrosion resistant Aluminum silicate
plate.
5. Heat resistant honeycomb ceramic thermal radiant plate
300mmX450mm, inclined at 30 degree.
6. T-shape porous burner with auto ignition system ignites the
specimen with automatic push system.
7. Gas control board. Needle valve control the height of burner
flame, MFC controls the gas flux and digital display.
8. Inverter control blower output, ventruri control the proportion
of air and gas, and flame is stable, and accurate.
9. porous calibration apparatus: adjust radiant plate output by
turning upward, left or right.
10. IR radiometer shows the temperature of the radiant plate.
11. Optional smoke density testing system.
12. Optical system 2900 ± 100 K light advanced optical signal
receiver.
13. integrated design with 19" PC of Lab view software.
14. Chimney with1pc thermocouple, and 1pc thermocouple inner
Chamber controlled by software.
Standards
ISO 9239-1 reaction to fire test of flooring material, Part 1,
measure the combustion performance of flooring material with
radiant heat.
ISO 9239-2 reaction to fire test of flooring material, Part 2,
measure the horizontal spread of flame, exposed to 25kw/m2 heat
flux.
ASTM E 648 Standard test method for flooring covering system CHF
with heat radiant energy source.
ASTM E 970 Standard test method for flooring material CHF of
exposed attic floor insulation using heat radiant energy source.
NFPA 253 Standard test method for CHF of floor covering system with
heat radiant energy source.
DIN 4102
Specification
| Dimension testing chamber | 2220(W)×1500(D)×2650(H)mm |
| Control chamber | 600(W)×600(D)×1600(H)mm |
| Gas control chamber | 600(W)×600(D)×1000(H)mm |
| Power | AC 220V, 50/60Hz, 25A |
| Weight | 220kg |
| Air supply option propane | 95% |
Test Report
| Report |
| Testing agency | |
| Standard | |
| Operator | | Test date | |
| Ambient temperature | | Environment humidity | |
| Equipment deadline | |
| Product name | | Sample serial number | |
| Model specification | |
| Sample size | | Device Code | |
| Material density (g/㎡) | | Test time(s) | |
| Debug balance | |
| Test Results: |
| Distance (mm) | Flame front end time(s) | Distance(mm) | Flame front end time(s) |
| 60 | | 560 | |
| 110 | | 610 | |
| 160 | | 660 | |
| 210 | | 710 | |
| 260 | | 760 | |
| 310 | | 810 | |
| 360 | | 860 | |
| 410 | | 910 | |
| 460 | | 960 | |
| 510 | | 1100 | |
| The front end of the flame reaches the longest distance (cm) | | Critical radiant flux(kW/m2) | |
| Total smoke value(%.min) | | Maximum absorption rate(%) | |
| 10min flame front end reach distance(mm) | | 10min critical radiant heat value(kW/m2) | |
| 20min flame front end reach distance(mm) | | 20min critical radiant heat value(kW/m2) | |
| 30min flame front end reach distance(mm) | | 30min critical radiant heat value(kW/m2) | |
| Ignition time(s) | | Flame extinction time(s) | |
| The phenomenon observed during the test: | |
Critical
Radiant Flux Flammability Testing Equipme...
