Environmental Test Chamber UV Sterilizer with High-Quality 304
Screen Stainless Steel
Product introduction of Environmental test chamber
Ultraviolet disinfection technology is the latest generation of
disinfection technology emerging in the late 1990s. It integrates
optics, microbiology, electronics, fluid mechanics, and
aerodynamics. It has the characteristics of high efficiency, broad
spectrum, low cost, long life, large water volume, and no secondary
pollution. It is internationally recognized in the 21st century.
Mainstream consumer technology.
Advantages of UV disinfection technology
The disinfection effect of ultraviolet C disinfection technology on
bacterial viruses and other pathogens has been recognized
worldwide, and it has unparalleled bactericidal efficiency. The
germicidal effect of ultraviolet rays on bacteria and viruses is
generally within one second. For traditional chlorine and ozone
methods, it takes 20 to 50 minutes to achieve the sterilization
effect of ultraviolet rays. It has a broad spectrum of efficient
sterilization, no secondary pollution, safe and reasonable design,
safe and reliable operation. Simple maintenance and low cost. This
equipment occupies a small area and has no noise. Continuous mass
sterilization. Wide application fields and many other advantages
Product parameters (according to customer requirements)
1. Total equipment length: 2000mm
2. Working area length: 1000mm
3. Feeding operation area: 500mm Discharging operation area: 500mm
4. Height of entrance and exit: 200mm
5. Conveyor width: 500mm
6. Conveyor belt from the ground: 750 ± 20mm
7. A total of 16 lamps are installed in the sterilizer, each power:
20W)
Product main configuration and structure
1. Work area tunnel body: high-quality 304 screen stainless steel
2. Working area tunnel cavity: mirror stainless steel Model: # 304
3. Body support frame: one set of Fangtong Steel Model: 2 ″
Fangtong
4. Air transport system: a set of forced air transport exhaust fans
(extracting harmful gas) Model: 6 inches
5. Thermal insulation material: Vacuum aluminum silicate + silk
cotton double layer Model: 60K
6. Conveyor belt: Teflon mesh belt 1. Main switch: 20A
7. Transport motor: 800W (inverter speed regulation)
8. Speed governor: 500W (electronic stepless inverter speed
regulation digital display speed operation)
9.Exhaust fan: CY-125
10. Ammeter: 50A set
11.Voltmeter: 220V one set
12. Working voltage: 200V--220V (± 5) Three-wire system 50Hz
Effective light moment of ultraviolet light source: 150mm
Tube length 460mm
16 UV germicidal lamp tubes * 20W UV lamps are located in the inner
cavity longitudinally, and are installed on the top, bottom, left
and right
The wavelength is 253.7nm, and the radiation intensity at a
distance of 1 meter is more than 160 microwatts per square
centimeter. Life is 8000 small
More than hours.)
UV
Weathering Test Chamber.pdf
