5208D Automatic Low Temperature Closed Cup Flash Point Tester
Product introduction Closed Cup Flash Point Tester
1. Full automatic closed mouth flash point tester, used to measure
the closed mouth flash point value of petroleum products.
2. Using 8-inch pure industrial true color touch screen, the
Chinese and English interface can be switched at will,
3. Automatically correct the effect of atmospheric pressure on the
test and calculate the correction value.
4. The lower computer stores 120 sets of historical data.
5. Ignition, printing, fully automatic.
6. Using imported Renesas MCU. Germany imported PT1000 high
precision temperature sensor.
7. Built-in high-precision flash point detection sensor, detection
time can reach milliseconds.
8. Simulation tracking shows the temperature rise as a function of
test time,
Application
This instrument is especially suitable for testing the flash point
of closed cups for various colored paints, paints, adhesives,
solvents, petroleum and related products with a flash point in the
range of -20 ℃ ～ + 80 ℃.
Technical parameters
1. working power: AC220V ± 10%, 50Hz;
2. Flash point detection range: (-20 ~ +100) ° C;
3. Measurement precision: The absolute difference between the two
experimental results is less than 2 °C (same operator);
The absolute difference between the two experimental results is
less than 3 ° C (different operators);
4. Temperature control accuracy: ± 0.5 ° C;
5. Ignition device: electronic ignition gun ignition;
6. cooling method: semiconductor refrigeration (external cold water
circulator);
7. the power supply voltage: AC220V ± 10%, 50Hz;
8. Power consumption of the whole machine: no more than 300W;
9. the ambient temperature: 5 ° C ~ 30 ° C;
10. Relative humidity: (30~80)%.
Features
(1) Designed in accordance with ASTM D3828,ISO3679,GB / T 5208 "Determination of Flash Point, Quick Balance Closed Cup
Method", to achieve the purpose of fast and low temperature test of
closed cup flash point
(2) Using semiconductor refrigeration devices and external cooling
water cooling devices, the instrument is small in size, fast in
cooling speed and easy to use.
(3) There are few test samples, and only 2 ml is required for each
injection (4 ml for solid or semi-solid samples).
(4) Except for ignition, the test process is completed
automatically and the test results are printed automatically.
Please review the video of the Closed Mouth Flash Point Tester
operation as below link:
https://youtu.be/FmxMemFId_4
